CHTXQ-2255 gantry multi line cutting machine

CHTXQ-2255 gantry multi line cutting machine

Technical parameters of CHTXQ-2255 gantry multi line cutting machine Main Specifications

Equipment use: The tool holder of this model is a fixed tool holder, with a total of three rollers, the length of the roller is 570/620mm, which is used for cutting products with a thickness of 0.3mm-12mm.

Technical characteristics of CHTXQ-2255 gantry multi line cutting machineBrief Introduction

1, the  machine  casting,  the  tool  frame  adopts  the  gantry  structure,  the  gantry  is located  on the  whole  casting  and the  machine  casting into one, the motor rotation without vibration, high-speed operation is more stable.

2, three  roller  tool  frame  casting  overall  forming,  independent  servo  motor drive smooth high-speed operation, to ensure cutting quality.

3, three motor independently drive three rollers, so that the three rollers are the drive shaft, reduce the wear of the steel wire to the roller, improve the use of the roller time.

4, the roller bracket installation hole with a machining center molding, to ensure that the spindle installation coaxial requirements.

5, the  roller  adopts  double  cone  structure,  easy  disassembly,  accurate  positioning, stable high speed operation, reliable accuracy.

6, under  the  table,  the  material  from  the  bottom  up  to  cut,  loading  and  unloading convenient.

7, double casting sand design, more conducive to waste discharge and cleaning.

8, the loading area is large, respectively: 220mm*570/620mm*180mm.

9, the operation is easy to use, automatic lifting shield, the workbench is fully expanded, easy to load and unload materials and roll.

10, high efficiency and low consumption, the equipment does not need air source, the power consumption of the whole machine does not exceed 15kw.