CHTXQ-260 dual station multi wire cutting machine

CHTXQ-260 dual station multi wire cutting machine

Technical parameters of CHTXQ-260 dual station multi wire cutting machineMain Specifications

Equipment use: This model is mainly developed for small batch orders and a model, a total of four roller double sheet material, the length of the roller is 210mm, for cutting products with a thickness of 0.8mm-45mm.

Technical characteristics of  CHTXQ-260 dual station multi wire cutting machineBrief Introduction

1, small equipment size, small footprint, small roller volume.

2, the guide wheel is less, the guide wheel is simplified to 6, the wire network wiring is less, the cutting fluid circulation is less.

3, cutting dispersion concentration, high cutting accuracy.

4, replace the roller province, equipment operation save electricity, glue slotting save cost.

5, under  the  table,  this  model  is  suitable  for  cutting  sample  pieces,  small  order products, flexible and timely.

6, easy to operate, loading and unloading roller can be completed within 15min, is the best substitute for the inner circle cutting machine.

7, the material plate can move 70mm freely before and after.

8. The guide wheel group is used to replace the upper roller for single line cutting, and the cutting of any thickness can be achieved without grooving.

9. When the whole board needs to be cut, the upper roller and the lower roller are used for the whole board cutting.

10, the thickness of products below 3mm, can use the next two roller winding cutting mode, cutting.