CHTXQ-210 multi wire cutting machine

CHTXQ-210 multi wire cutting machine

Technical parameters of CHTXQ-210 multi wire cutting machineMain Specifications

CHTXQ-210 multi wire cutting machine Equipment use: This model is 3 roller rotary bracket, roller length is 210mm, used for cutting 0.3mm to 65mm products, with 

transverse movement, can cut tiles, can be single line cutting, multi-line cutting.

Technical characteristics of  CHTXQ-210 multi wire cutting machineBrief Introduction

1, small equipment size, small footprint, small roller volume.

2, the guide wheel is less, the guide wheel is simplified to 6, the wire  network wiring is less, the cutting fluid circulation is less.

3, cutting dispersion concentration, high cutting accuracy.

4, replace the roller province, equipment operation save electricity, glue slotting save cost.

5, under the table, this model is suitable for cutting sample pieces, small order products, flexible and timely.

6, easy to operate, loading and unloading roller can be completed within 10 minutes, is the best substitute for the inner circle cutting machine.

7, the material plate can move 70mm freely before and after.

8. The guide wheel group is used to replace the upper roller for single line  cutting, and the cutting of any thickness can be achieved without grooving.

9. When the whole board needs to be cut, the upper roller and the lower  roller are used for the whole board cutting.

10, the thickness of products below 3mm, can use the next two roller  winding cutting mode, cutting.