CHTXQ-4646 multi wire cutting machine

CHTXQ-4646 multi wire cutting machine

Technical parameters of CHTXQ-4646 multi wire cutting machine Main Specifications

Equipment use: The tool holder of this model is 4 roller tool holder, the length of the roller is 490mm, which is used for cutting products from 0.3mm to 20mm, and has the effect of  improving the cutting accuracy of the parts to be cut.

Technical characteristics of  CHTXQ-4646 multi wire cutting machine Brief Introduction

1, the whole machine integrated casting, reduce the cumulative tolerance caused by assembly, the overall structure does not deform, high-speed operation is more stable.

2, the machine for the lower type of swing table, through the swing device it self swings at the same time to drive the parts to be cut together to achieve the swinging cutting of the cutting parts.

3. When replacing different parts to be cut, the thickness of the material plate or marble slab can be adjusted to make the center of the material coincide with the center line of the guide block arc, which increases the accuracy of the cutting of the material plate.

4, the four motor is directly connected to the four rollers, so that the four rollers are the drive shaft, reducing the wear of the steel wire to the roller, and improving the service time of the roller.

5, less guide wheels, guide wheels streamlined to 8.

6, the loading area is: ￠460mm*490mm .

7, easy to operate and use, the workbench is fully developed, easy to load and unload materials and roll.

8, high efficiency and low consumption, improve the cutting efficiency and cutting accuracy of hard and brittle materials.