CHTXQ-260 multi wire cutting machine

CHTXQ-260 multi wire cutting machine

Technical parameters of CHTXQ-260 multi wire cutting machineMain Specifications

Equipmentuse: This model is mainly for optical glass size and research and development of a model, a total of three rollers, the length of the roller is 260mm, for cutting thickness 0.3mm-45mm products.

Technical characteristics of  CHTXQ-260 multi wire cutting machineBrief  Introduction

1, small equipment size, small footprint, small roller volume.

2, the guide wheel is less, the guide wheel is simplified to 6, the wire network wiring is less, the cutting fluid circulation is less.

3,cutting dispersion concentration, high cutting accuracy.

4, replace the roller province, equipment operation save electricity, glue slotting save  cost.

5, under  the  table,  this  model  is  suitable  for  cutting  sample  pieces,  small  order  products, flexible and timely.

6, easy to operate, loading and unloading roller can be completed within 10 minutes, is the best substitute for the inner circle cutting machine.

7, the material plate can move 70mm freely before and after.

8. The guide wheel group is used to replace the upper roller for single line cutting, and the cutting of any thickness can be achieved without grooving.

9. When the whole board needs to be cut, the upper roller and the lower roller are used for the whole board cutting.

10, the thickness of products below 3mm, can use the next two roller winding cutting