CHT-620F Multi line Cutting Machine

CHT-620F Multi line Cutting Machine

Technical parameters of CHT-620F Multi line Cutting MachineMain Specifications

Equipment use: The tool holder of this model is a rotating tool holder with four rollers, the length of the roller is 620mm, which is used for cutting products with a thickness of 0.3mm-65mm.

Technical characteristics of  CHT-620F Multi line Cutting MachineBrief Introduction

1, the casting body, so that the overall structure is not deformed, high-speed operation is more stable.

2, spindle precision 0.01mm, easy to disassemble.

3, under  the  table,  the  material  from  the  bottom  up  to  cut,  loading  and  unloading  convenient.

4, the  four  motor  is  directly  connected  to  the  four  rollers,  so  that  the  four  rollers become the drive shaft, reduce the wear of the steel wire to the roller, and improve the use time of the roller.

5, the rotary tool holder adopts the split design, can adjust the Angle according to the demand, the use of trigonometric function operation method to adjust the steel line movement track, to ensure the cutting accuracy.

6,the machine  is divided  into high-speed machine  and ordinary models, high-speed  machine  is faster than ordinary models, 

higher  line  speed, higher  cutting  efficiency,  cutting the same material can be thinner diamond line.

7, loading area: 145mm*620mm*160mm*2 version.

8, the operation is easy to use, automatic lifting shield, the workbench is fully expanded, easy to load and unload materials and roll.

9, high efficiency and low consumption, the equipment does not need air source, the power consumption of the whole machine does not exceed 15kw.