CHTXQ-620A multi wire cutting machine

CHTXQ-620A multi wire cutting machine

Technical parameters of CHTXQ-620A multi wire cutting machineMain Specifications

Equipment use: The tool holder of this model is a rotating tool holder with four rollers, the length of the roller is 620mm, which is used for cutting products with a thickness of 0.5mm-65mm.

Technical characteristics of  CHTXQ-620A multi wire cutting machineBrief Introduction

1, the casting body, so that the overall structure is not deformed, high-speed operation is more stable.

2, spindle precision 0.01mm, easy to disassemble.

3, under  the  table, the material  from  the  bottom  up  to  cut,  loading  and  unloading convenient.

4,  the  four  motor  is  directly  connected  to  the  four  rollers,  so  that  the  four  rollers become the drive shaft, reduce the wear of the steel wire to the roller, and improve the use time of the roller.

5, the rotary tool holder adopts the split design, can adjust the Angle according to the demand, the use of trigonometric function operation method to adjust the steel line movement track, to ensure the cutting accuracy.

6, less guide wheels, guide wheels streamlined to 8.

7, the loading area is large: 180mm*620mm *160mm*2 version.

8, the operation is easy to use, automatic lifting shield, the workbench is fully expanded, easy to load and unload materials and roll.

9, high efficiency and low consumption, the equipment does not need air source, the